• 05-31-01-001

• Linkage Maul : 800.10689 Gr.1 and 800.10689 Gr.2
• 24 Pieces

• 05-31-00-003

• Delivery Maul 8s 5" DG : deflectors 1 1/8", including :
• 0 x 1 1/8 - Upper - Sec1 & 8 825-5027-80
• 2 x 1 1/8 - Upper - Sec2 & 7 825-5027-85
• 2 x 1 1/8 - Upper - Sec3 & 6 825-5027- ?
• 2 x 1 1/8 - Upper - Sec4 & 5 825-5027-90
• 0 x 1 1/8 - Lower - Sec1 825-5027-95
• 1 x 1 1/8 - Lower - Sec2 825-5027-100
• 1 x 1 1/8 - Lower - Sec3 825-5027-105
• 0 x 1 1/8 - Lower - Sec4 825-5027-110
• 1 x 1 1/8 - Lower - Sec5 825-5027-115
• 1 x 1 1/8 - Lower - Sec6 825-5027-120
• 1 x 1 1/8 - Lower - Sec7 825-5027-125
• 1 x 1 1/8 - Lower - Sec8 825-5027-130

• 05-10-31-021

• G 1 pc Cylinder head for baffle mech Emhart 23-7417
• H 1pc Carter-oil container Emhart 23-6518
• I 1pc Baffle mech-cylinder cam Emhart 23-5045
• J 1pc Carter-oil container Emhart 23-5153
• N 2 pcs Cylinder head Emhart 23-16181

• New or in good condition
• very attrative price !
• complete list with unit prices available on request
• individual pictures available on request

• 05-53-16-002

• Cooling Nozzle DG
• Including 13 pcs
• Ref. : 191-13317 Middle

• 05-53-17-001

• Cooling Nozzle DG
• Including :
  • 9 pcs ref. 191-13315 RH
  • 10 pcs ref. 191-13316 LH
  • 14 pcs ref. 191-13317 Middle

• 05-53-19-001

• Cooling Nozzle DG
• Including :
  • 5 pcs Cooling Nozzle SG narrow
  • 8 pcs Cooling Nozzle DG wide

• 05-53-18-001

• Plungermechanism SG
• Ref. : 62-D-10

• 05-53-19-004

• Take Out Tong Head SG
• including : 8 pcs

• 05-53-20-006

• Doubledeckhoulder SG

• 05-10-31-009

• Spout casing Emhart 503

• Very attractive price !

• 05-22-00-001

• Front casing (conditioning section )
• Length 1220mm,
• Width : 1580mm
• with front plate and spout casing 503
• Original Emhart

• very good condition
• very attractive price

• 05-10-31-023

• A 1 pc Stop plate L Emhart 191-11328
• B 12 pcs Stop plate R Emhart 191-11329
• E 1 pc Bague (bushing ?) Emhart 23-6261
• F 120 pcs Plunger positioner NNPB Heye
• G 1 pc Bottom plate support adapter Emhart 191-21451
• H 1 pc Reductor type NRV040 Moto Vario 600-3717
• I 3 pcs Bottom plate support adapter Emhart 191-7202-1

• new or in very good condition
• very attractive price
• complete list with unit prices available on request
• individual pictures are available on request

• 05-10-31-024

• H 13 pcs Cooling Nozzle DG (for IS 4’’1/4) Emhart 191-13317 Middle
• I 9 pcs Cooling Nozzle DG (for IS 4’’1/4) Emhart 191-13315 RH
• J 10 pcs Cooling Nozzle DG (for IS 4’’1/4) Emhart 191-13316 LH
• K 14 pcs Cooling Nozzle DG (for IS 4’’1/4) Emhart 191-13317 Middle
• L 8 pcs Cooling Nozzle DG Wide (for IS 4"1/4) Emhart
• M 5 pcs Cooling Nozzle DG Narrow (for IS 4"1/4) Emhart

• new or in very good condition
• very attractive price
• complete list with unit prices available on request
• individual pictures are available on request

• 05-10-31-025

• 2 pcs Control cabinet for Servo Gob Distributor Heye (see picture C)

• in good condition
• very attractive price

• 05-10-31-026

• 1 pc Stacker push bar : L : 2,9m - d : 18cm

• in very good condition
• very attractive price

• 05- 28-10-001

• Feeder + Tube + Shear mechs (Emhart 144)

• In very good condition
• Stopped in September 2017
• Still in production hall
• To be dismantled

• 05-10-29-001

• Lehr Loader / Stacker Type 4505
• Was used on a 3m wide annealing lehr
• Make : HEYE-GLAS (Germany)
• Including control cabinet
• Complete, with moving rails and push-bar support
• Manufacturing year : 1999
• With original documentation

• In very good condition
• Immediately available

• 05-76-00-003

• Make : Emhart
• Complete Rotating tube-mechanism 555
• Manufacturing year : 1997

• Immediately available
• Feeder-mech 555 also available
• Shear-mech 565 also available
• Very good price

• 05-59-00-001

• IS machine 12s EF 4’’1/4 TG Bottero (not complete), including :
  • Machine frame with all section boxes in it
  • Servo-invert and servo take-out
  • Manufacturing : Bottero (Italy) in 2014
  • Machine is stopped since a few years
  • Some mechanisms and parts were removed
  • No electronics anymore
  • The remaining parts are in VG condition

• Pictures available
• Sold ‘as is, where is’ at very good price

• 05-02-00-001

• Timer and Drive for Bottero IS machine 10section, including :
  • 1. Timer panel, model EFC700, complete ;
  • 2. Drive panel, model FMC700, complete ;
  • 3. Remote operation panels for Blank Side
  • 4. Remote operation panels for Blow Side
  • 5. Motors (Tube, Feeder, DG, Conveyor, Ware Transfer, Cross Conveyor, Stacker)
  • 6. All cabling for interconnections
  • 7. HHT and Supervisory system SPV400, on WinXP

• Bought NEW in 2010 and never installed !
• With original packaging

• Absolutely new !
• More pictures and drawings are available
• Very good price

• 05-10-23-002

• Make : BDF (Italy)
• Parallel Shear-mechanism
• Including support

• Immediately available
• Very good price

• 3 production lines including :
  • 3x NIS Emhart 12 sections Left Hand (2xTG & 1xDG)
  • Manufacturing Year : 2009 – Last big repair : 2018
  • From feeder-mechanism to stacker -** Complete with all mechanisms
  • 1 set of variable equipment is included with each machine -** Timing system : Emhart FlexIS
  • Not included :
    • Ware transfer
    • lubrication pump
    • cables
• 3x Annealing Lehrs Pennekamp 2009 (belt width : 320cm)
• 3x inspection lines including : (for the 3 lines)
• 4x Flexinspect BC (Emhart 2009)
• 7x Flexinspect T (Emhart 2009)
• 3x Palletizers full automatic (MSK 2009)
• 1x Pallet Shuttle car (MSK 2009)
• 1x Pallet preparation station (MSK 2009)
• The Shrink line is not included !

REMARKS :

• The lines have been stopped recently
• In very good condition ; very clean and always been well maintained
• dismantling and loading are not included

IS MACHINE EMHART 10 SECTIONS EF 5" DG Right Hand :

• Manufacturing Year : 1998 – Last big repair : 06/2014
• Process : BB & PB
• From feeder to conveyor extension
• Complete with all mechanisms
• 1 set of variable equipment is included
• Gob distributor Emhart
• Timing Emhart FlexIS
• Servo Feeder Emhart 570
• Parallel Shear Mech Emhart 565
• Valve block : 26Lines
• HE Coating Imaca
• Mould cooling Blower available
• Not included : Transfer Wheel ; Cross-conveyor ; Stacker ; Lubrication pump ; Cables

REMARKS :

• Still running ; wil be stopped in Sept. 2026
• In very good condition ; very clean and always been well maintained
• dismantling included
• loading not included

• 05-57-12-001

• Make : Emhart 6’’1/4 DG
• Manufacturing year : 2014(22pcs) & 2015(10pcs)
• Complete with valve-block and all mechanisms
• variables not included

• URGENT !
• 10 are still running, will be stopped on 9 September 2024
• In very good condition
• Very good price
• More pictures available (while running)

• 05-57-13-001

• Make : GPS (Emhart compatible)
• Complete from feeder-mechanism to conveyor extension
• Manufacturing year : 2004 with Major Repair 2015 (by Ergon)
• Specifications :
  • 8 sections 5" Double Gob - Blow & Blow + NNPB
  • Direction : Right Hand
  • Servo Feeder : GPS
  • Parallel Shear-Mechanism (Servo) GPS
  • Gob-Distributor : GPS
  • Servo Pusher GPS
  • Mechanic Take-out
  • Mechanic Invert
  • Delivery : hangers + scoops + throughs + deflectors = included
  • Conveyor + extension = included
  • Radial Blank side cooling
  • Radial/Vertiflow Blow side cooling
  • Control system : GPS + Futronic
  • All mechanisms are included (Emhart compatible !)
  • Variables:1 set included
• Also included :
  • Hot End Coating tunnel
  • Dismantling job and moving outside
• Are NOT included :
  • Drop-guides
  • Transfer-wheel, stacker and cross-conveyor
  • Cables and piping (cut at dismantling)
  • Loading on trucks or into containers

• In very good condition ; very clean and always been well maintained
• Stopped on 9 September 2024
• More pictures and movies available (while running)
• Mould cooling and conveyor cooling blowers are also available

• 1x NIS Emhart 12 sections Left Hand TG
  • Manufacturing Year : 2009 – Last big repair : 2018
  • From feeder-mechanism to stacker
  • Complete with all mechanisms
  • 1 set of variable equipment is included
  • Timing system : Emhart FlexIS
  • Not included :
    • Ware transfer
    • lubrication pump
    • cables
• 1x Annealing Lehr Pennekamp 2009 (belt width : 320cm)
• 1x inspection line including :
  • 2x Flexinspect BC (Emhart 2009)
  • 2x Flexinspect T (Emhart 2009)
  • 1x Palletizer full automatic (MSK 2009)

• Remarks :
  • The line has been stopped recently
  • In very good condition ; very clean and always been well maintained
  • dismantling and loading are not included
  • 2 similar lines are available (see ref. 05-79-00-123)

• 05-56-11-001

• AIS MACHINE EMHART 10 SECTIONS TG 4"1/4 & DG 6"1/4 :
  • Mfg Yr : 2011
  • LH
  • NNPB
  • from feeder to stacker
  • not complete, some mechanims are missing
  • no variables
  • no gob distributor
  • timing Emhart FlexIS
  • full Servo
  • Servo Feeder Emhart 570
  • Parallel Shear Mech Emhart 565
  • HE Coating Arkema
  • Ware transfer & Stacker : Sheppee
  • Mould cooling Blower available

• In good condition ; very clean and always been well maintained
• Conversion kit TG-DG included !
• dismantling and loading not included

• 05-56-12-001

• AIS MACHINE EMHART 10 SECTIONS DG 6"1/4 :
  • Mfg Yr : 2011
  • RH
  • NNPB
  • from feeder to stacker
  • not complete, some mechanisms are missing
  • no variables
  • no gob distributor
  • timing Emhart FlexIS
  • full Servo
  • Servo Feeder Emhart 570
  • Parallel Shear Mech Emhart 565
  • HE Coating Arkema
  • Ware transfer & Stacker : Sheppee
  • Mould cooling Blower available

• In good condition
• very clean and always been well maintained
• dismantling and loading not included

• 05-56-13-001

• IS MACHINE HEYE INTERNATIONAL 8 SECTIONS DG 5" :
  • Mfg Yr : Unknown
  • LH
  • complete from feeder to stacker
  • with all mechanisms & 1 set of variables
  • timing Futronic
  • Feeder-mech Heye
  • Angle Shear Mech Heye
  • Gob Distr. Heye
  • Coating
  • Ware transfer & Stacker : Sheppee
  • Mould cooling Blower available

• In very good condition ; very clean and always been well maintained
• dismantling and loading not included

• 05-59-22-001

• IS machine BOTTERO 12 sections 6"1/4 DG EMOC :
  • Mfg Yr : 2014
  • LH
  • BB,PB,NNPB
  • complete from feeder to stacker
  • with all mechanisms & 1 set of variables
  • timing Bottero SPV400/FMC700
  • Servo Takeout & Invert
  • Electronic Feeder Bottero A495
  • Parallel Shear Mech Bottero AX885
  • Electronic Gob Distr. Bottero A395
  • HE Coating Revimac
  • Ware Transfer Sheppee HST6000
  • Servo Stacker Revimac
  • Mould & conveyors cooling Blowers included

• not included:Cables and piping (cut at dismantling)

• Stopped in December 2024
• In very good condition ; very clean and always been well maintained
• dismantling, packing and loading not included
• More pictures available (while running)

IS MACHINE EMHART 10 SECTIONS EF 5" DG Right Hand :

• Manufacturing Year : 1998 – Last big repair : 10/2015
• Process : BB & PB
• From feeder to conveyor extension
• Complete with all mechanisms
• 1 set of variable equipment is included
• Gob distributor Emhart
• Timing Emhart FlexIS
• Servo Feeder Emhart 570
• Parallel Shear Mech Emhart 565
• Valve block : 26Lines
• HE Coating Imaca
• Mould cooling Blower available
• Not included : Transfer Wheel ; Cross-conveyor ; Stacker ; Lubrication pump ; Cables

REMARKS :

• Still running ; wil be stopped in Sept. 2026
• In very good condition ; very clean and always been well maintained
• dismantling included
• loading not included

• IS MACHINE BOTTERO TANDEM 2x8 SECTIONS 4"1/4 EMOC - TG :
  • Manufacturing Year : 2017
  • Process : BB, PB & NNPB
  • From feeder to cross-conveyor
  • Right Hand conveyor
  • Complete with all mechanisms
  • Spout casings 703 with 10” bore diameter
  • Servo Feeder mechanism Bottero
  • Servo Shear mechanism Bottero
  • Servo Gob distributor Bottero
  • Servo Take-Out, Invert and Pushers
  • Lubrication system Lincoln
  • 1 set of variable equipment is included
  • Control system : Bottero EGD700-FMC700-EFC700-SMC700-HMI700
  • Electropneumatic Valve blocks with 22Lines
  • E-MOC mechanisms for parallel Mold opening and closing + optimal cooling
  • TG quick change Plunger mechs
  • Blank side crane for mold lifting
  • UPS 100kVA
  • HE Coating
  • Transfer Wheel Sheppee VFT-2000 HS
  • Cross-conveyor
  • Servo-Stacker Bottero RSS100
  • Mould cooling Blowers available
  • Not included : Cables

• Remarks :
  • In very good condition ; very clean and always been well maintained
  • Still running ; available in April 2026
  • dismantling and loading not included