| IS machine 6s EF 4’’1/4 SG Emhart |
1 |
Pcs |
|
IS machine 6s EF 4''1/4 SG Emhart, including : Machine frame with all section boxes in it Gob distributor Machine conveyor (LH) and extension Manufacturing year : probably 1995 Machine is stopped since many years |
- Not sure if it is complete
- Sold ‘as is, where is’ at very good price
|
| 1 set Cams |
1 |
Set |
|
Shear cams Plunger cams list available on request |
- used but in good condition
|
| Air-Gas Combustion skid for tandem forehearth |
1 |
Set |
|
Air-Gas combustion skids (2 pcs), suitable for a tandem forehearth : 1 skid is for 2x spouts and 2x conditioning section 1 skid is for the inlet zone |
- Immediately available
- In very good working condition
|
| Bafflearm SG (for Emhart 4’’1/4) |
1 |
Set |
|
Bafflearm SG including 5 pcs |
|
| Complete Timer and Drive system for Bottero IS machine 10s |
1 |
Pcs |
|
Timer and Drive for Bottero IS machine 10section, including : 1. Timer panel, model EFC700, complete ; 2. Drive panel, model FMC700, complete ; 3. Remote operation panels for Blank Side 4. Remote operation panels for Blow Side 5. Motors (Tube, Feeder, DG, Conveyor, Ware Transfer, Cross Conveyor, Stacker) 6. All cabling for interconnections 7. HHT and Supervisory system SPV400, on WinXP Bought NEW in 2010 and never installed ! With original packaging |
- Absolutely new !
- More pictures and drawings are available
- Very good price
|
| Control Cabinet for Servo Gob Distributor (Heye) |
2 |
Pcs |
|
2 pcs Control cabinet for Servo Gob Distributor Heye (see picture C) |
- in good condition
- very attractive price
|
| Cooling blower for IS machine conveyor |
1 |
Pcs |
|
Make : Ferrari 132kW - 800mmWG Was used on the conveyor (death plates) of a 12 section IS machine Manufacturing year : 1997 Complete with drive, frame, motorized inlet-vane, noise reducer, frequency drive (Siemens) |
- In very good condition
- Was stopped in August 2020
- Already dismantled and stored
- Very good price
- Blower for mould cooling also available
|
| Cooling Nozzle DG (for Emhart 4’’1/4) |
1 |
Set |
|
Cooling Nozzle DG Including : 9 pcs ref. 191-13315 RH 10 pcs ref. 191-13316 LH 14 pcs ref. 191-13317 Middle |
|
| Cooling Nozzle DG (for Emhart 4’’1/4) |
1 |
Set |
|
Cooling Nozzle DG Including : 5 pcs Cooling Nozzle SG narrow 8 pcs Cooling Nozzle DG wide |
|
| Cooling Nozzle DG (for IS Emhart 4’’1/4) |
1 |
Set |
|
Cooling Nozzle DG Including 13 pcs Ref. : 191-13317 Middle |
|
| Cooling parts for IS machines |
1 |
Set |
|
H 13 pcs Cooling Nozzle DG (for IS 4''1/4) Emhart 191-13317 Middle I 9 pcs Cooling Nozzle DG (for IS 4''1/4) Emhart 191-13315 RH J 10 pcs Cooling Nozzle DG (for IS 4''1/4) Emhart 191-13316 LH K 14 pcs Cooling Nozzle DG (for IS 4''1/4) Emhart 191-13317 Middle L 8 pcs Cooling Nozzle DG Wide (for IS 4"1/4) Emhart M 5 pcs Cooling Nozzle DG Narrow (for IS 4"1/4) Emhart |
- new or in very good condition
- very attractive price
- complete list with unit prices available on request
- individual pictures are available on request
|
| Deadplate dampers |
12 |
Pcs |
|
Deadplate dampers |
|
| Delivery Maul 8s 5" DG : deflectors 1 1/8" |
1 |
Set |
|
Delivery Maul 8s 5" DG : deflectors 1 1/8", including : 0 x 1 1/8 - Upper - Sec1 & 8 825-5027-80 2 x 1 1/8 - Upper - Sec2 & 7 825-5027-85 2 x 1 1/8 - Upper - Sec3 & 6 825-5027- ? 2 x 1 1/8 - Upper - Sec4 & 5 825-5027-90 0 x 1 1/8 - Lower - Sec1 825-5027-95 1 x 1 1/8 - Lower - Sec2 825-5027-100 1 x 1 1/8 - Lower - Sec3 825-5027-105 0 x 1 1/8 - Lower - Sec4 825-5027-110 1 x 1 1/8 - Lower - Sec5 825-5027-115 1 x 1 1/8 - Lower - Sec6 825-5027-120 1 x 1 1/8 - Lower - Sec7 825-5027-125 1 x 1 1/8 - Lower - Sec8 825-5027-130 |
|
| Delivery Maul 8s 5" DG : throughs No : 2 and No 1 1/2 |
1 |
Set |
|
Delivery Maul 8s 5" DG : throughs No : 2 and No 1 1/2, including : 2 x N°2 - Upper - Sec1 825-5027-144 Original 1 x N°2 - Upper - Sec1 825-5027-144 Metal 3 x N°2 - Upper - Sec2 825-5027-145 Original 1 x N°2 - Upper - Sec2 825-5027-145 Metal 3 x N°2 - Upper - Sec3 825-5027-146 Original 1 x N°2 - Upper - Sec3 825-5027- Metal 3 x N°2 - Upper - Sec4 825-5027-147 Original 3 x N°2 - Upper - Sec5 825-5027-148 Original 1 x N°2 - Upper - Sec5 825-5027-148 Metal 3 x N°2 - Upper - Sec7 825-5027-149 Original 1 x N°2 - Upper - Sec7 825-5027-149 Metal 3 x N°2 - Upper - Sec8 825-5027-150 Original 3 x N°2 - Upper - Sec6 825-5027-157 Original 1 x N°2 - Upper - Sec6 825-5027-157 Metal 4 x N°2 - Lower - Sec1 & 8 825-5027-151 Original 2 x N°2 - Lower - Sec1 & 8 825-5027-151 Metal 6 x N°2 - Lower - Sec2 & 7 825-5027-152 Original 1 x N°2 - Lower - Sec2 & 7 825-5027-152 Metal 5 x N°2 - Lower - Sec3 & 6 825-5027-153 Original 1 x N°2 - Lower - Sec3 & 6 825-5027-153 Metal 6 x N°2 - Lower - Sec4 & 5 825-5027-154 Original 2 x N°2 - Lower - Sec4 & 5 825-5027-154 Metal 2 x N°1 1/2 - Lower - Sec1 & 8 825-5027-184 Original 2 x N°1 1/2 - Lower - Sec2 & 7 825-5027-185 Original 1 x N°1 1/2 - Lower - Sec2 & 7 825-5027-185 Metal 2 x N°1 1/2 - Lower - Sec3 & 6 825-5027-186 Original 1 x N°1 1/2 - Lower - Sec3 & 6 825-5027-186 Metal 2 x N°1 1/2 - Lower - Sec4 & 5 825-5027-193 Original 1 x N°1 1/2 - Upper - Sec2 825-5027-177 Original 1 x N°1 1/2 - Upper - Sec3 825-5027-178 Original 1 x N°1 1/2 - Upper - Sec4 825-5027-179 Original 1 x N°1 1/2 - Upper - Sec4 825-5027-179 Metal 1 x N°1 1/2 - Upper - Sec5 825-5027-180 Original 1 x N°1 1/2 - Upper - Sec6 825-5027-181 Original 1 x N°1 1/2 - Upper - Sec7 825-5027-182 Original 1 x N°1 1/2 - Upper - Sec8 825-5027-183 Original |
|
| Doubledeckholder SG (for Emhart 4’’1/4) |
2 |
Pcs |
|
Doubledeckhoulder SG |
|
| Feeder + Tube + Shear mechs (Emhart 144) |
2 |
Set |
|
Feeder + Tube + Shear mechs (Emhart 144) |
- In very good condition
- Stopped in September 2017
- Still in production hall
- To be dismantled
|
| Feeder lifting hoist |
3 |
Pcs |
|
Feeder lifting hoist To lift spout bowl, water-jacket,… With rachet winch and cable |
|
| Holder SG No. 0 (for Emhart 4’’1/4) |
1 |
Set |
|
Holder SG No. 0 Ref. : 191-5669 Gr.1 including 16 pcs |
|
| Holder SG No. 1 Plunger Lock (for Emhart 4’’1/4) |
1 |
Set |
|
Holder SG No. 1 Plunger Lock Ref. : 191-5670 Gr.1 Including 4 pcs |
|
| HOT END COATING TUNNEL |
3 |
Pcs |
|
Hot End Coating Tunnel : Make : Unknown Max. Article height : 35cm |
- Needs to be checked
- Very low price
|
| HOT END COATING TUNNEL (Vidromecanica) |
1 |
Pcs |
|
Hot End Coating Tunnel : Make : Vidromecanica (Portugal) Manufacturing year : 2016 Max. Article height : 40cm |
- Needs to be checked
- Very low price
|
| IS machine 12s EF 4’’1/4 TG Bottero |
1 |
Pcs |
|
IS machine 12s EF 4''1/4 TG Bottero (not complete), including : Machine frame with all section boxes in it Servo-invert and servo take-out Manufacturing : Bottero (Italy) in 2014 Machine is stopped since a few years Some mechanisms and parts were removed No electronics anymore The remaining parts are in VG condition |
- Pictures available
- Sold ‘as is, where is’ at very good price
|
| IS machine 8s EF 4’’1/4 SG Heye |
1 |
Pcs |
|
IS machine 8s EF 4''1/4 SG Heye, including : Machine frame with all section boxes in it Machine is RH Manufacturing year : 1995 Machine is stopped since many years |
- No gob-distributor, no conveyor
- Sold ‘as is, where is’ at very good price
|
| IS machine BOTTERO 10 sections (6’’1/4 DG) - EMOC |
1 |
Pcs |
|
Make : Bottero Type : EMOC = Parallel mould opening (Blank and Blow side) Complete from feeder-mechanism to cross-conveyor Manufacturing year : 12/2008 Specifications : 10 sections 6''1/4 Double Gob Direction : Left Hand Gob-Distributor : Bottero Servo invert and Servo take-out mechanisms All mechanisms are included Delivery : hangers + scoops + throughs + deflectors = included Conveyor + extension = included Blank side & Blow side manifolds = included Control system : Bottero STN450+SVD400 and AVACON (Timing + Servo-Pushers) Variables included Also included : Hot End Coating tunnel Cross-conveyor Lots of spare parts Are NOT included : Stacker Cables and piping (cut at dismantling) Dismantling Loading on trucks or into containers |
- In very good condition
- Machine is very clean and has always been well maintained !
- Still running, will be stopped Mid-September 2024
- Very good price
- More pictures and movies available (while running)
|
| IS machine BOTTERO 12 sections (6’’1/4 DG) - EMOC |
1 |
Pcs |
|
Make : Bottero Type : EMOC = Parallel mould opening (Blank and Blow side) Complete from feeder-mechanism to cross-conveyor Manufacturing year : 12/2008 Specifications : 12 sections 6''1/4 Double Gob Direction : Left Hand Feeder : 715 High Speed Gob-Distributor : Bottero Servo invert and Servo take-out mechanisms All mechanisms are included Delivery : hangers + scoops + throughs + deflectors = included Conveyor + extension = included Blank side & Blow side manifolds = included Control system : Bottero STN450+SVD400 and AVACON (Timing + Servo-Pushers) Variables included Also included : Hot End Coating tunnel Cross-conveyor Lots of spare parts Dismantling Are NOT included : Stacker Cables and piping (cut at dismantling) Loading on trucks or into containers |
- In very good condition
- Machine is very clean and has always been well maintained !
- Still running, will be stopped Mid-September 2024
- Very good price
- More pictures and movies available (while running)
|
| IS machine EMHART 10 sections 3”TG (4’’1/4 DG) |
1 |
Pcs |
|
Make : Emhart Complete from gob-distributor to conveyor extension Manufacturing year : 1990 Last big repair (C class) : 2008 Specifications : 10 section IS machine full Emhart 3” TG ( 4”1/4 DG) Complete from Gob-distributor to conveyor extension Direction : Right Hand Gob-Distributor (Emhart Servo 535) Electro-pneumatic valve blocks 21 lines Servo Invert / Servo Take out / Servo pusher ( 860 type) All mechanisms are included Delivery hangers Conveyor + extension Blank side & Blow side manifolds FlexIS control system Variables included : funnel arm, baffle arm, neck ring arm, blow head arm, take out tong head, blank side mold holder & insert, blow side mold & insert Are NOT included : Hot End Coating tunnel, Cross-conveyor, Ware-Transfer, Stacker. MMI (Man Machine Interface) : operator console with touch screen and windows operating system Cables and piping |
- In very good condition
- Machine is very clean and has always been well maintained !
- Stopped in November 2020
- Very good price
- More pictures and movies available soon (while running)
|
| IS machine EMHART 10 sections EF (6’’1/4 DG) |
1 |
Pcs |
|
Make : Emhart Complete from feeder mechanism to stacker Manufacturing year : 1996 Last big repair : ? Specifications : 10 section IS machine full Emhart 6”1/4 DG Direction : Left Hand Feeder (Emhart 555-585) Tube and Shear mech Gob-Distributor : Emhart 535 All mechanisms are included Delivery hangers included Conveyor + extension Blank side & Blow side manifolds Control system : T600 Variables included Also included : Hot End Coating tunnel, Cross-conveyor, Ware-Transfer Sheppee HST-6000, Stacker Revimac Are NOT included : Cables and piping |
- In very good condition
- Machine is very clean and has always been well maintained !
- Stopped in July 2023
- Already dismantled
- Very good price
|
| IS machine EMHART 8 sections EF (4’’1/4 SG) |
1 |
Pcs |
|
Make : Emhart Complete from feeder mechanism to stacker Manufacturing year : 1986 Last big repair :2016 Specifications : 8 section IS machine full Emhart 4”1/4 SG Direction : Right Hand -** Feeder (Heye) Tube and Shear mech Gob-Distributor : Emhart 535 All mechanisms are included Delivery hangers included Conveyor + extension Blank side & Blow side manifolds Control system : T600 Variables included Also included : Hot End Coating tunnel, Cross-conveyor, Ware-Transfer Sheppee HST-6000, Stacker Revimac Are NOT included : Cables and piping |
- In very good condition
- Machine is very clean and has always been well maintained !
- Stopped in July 2023
- Already dismantled
- Very good price
- More pictures and movies available (while running)
|
| IS machine EMHART Tandem 2x6 sections EF (5’’1/2 DG) |
1 |
Pcs |
|
Make : Emhart Complete from feeder mechanism to stacker Manufacturing year : ? Last big repair : ? Specifications : Tandem 2x6 section IS machine full Emhart 5”1/2 DG Direction : Right Hand 2x Feeder (Emhart 81 - mechanical) Tube and Shear mech Gob-Distributor : Emhart 535 All mechanisms are included Delivery hangers included Conveyor + extension Blank side & Blow side manifolds Control system : T600 Variables included Also included : Hot End Coating tunnel, Cross-conveyor, Ware-Transfer Sheppee HST-6000 Are NOT included : Stacker Cables and piping |
- In very good condition
- Machine is very clean and has always been well maintained !
- Stopped in July 2023
- Already dismantled
- Very good price
- More pictures and movies available (while running)
|
| Linkage Maul : 800.10689 Gr.1 and 800.10689 Gr.2 |
1 |
Set |
|
Linkage Maul : 800.10689 Gr.1 and 800.10689 Gr.2 24 Pieces |
|
| Mould cooling blower for IS machine |
1 |
Pcs |
|
Make : Ferrari 250kW - 1300mmWG Was used on a 12 section IS machine Tandem (running PBNN – TG – 4”1/4) Manufacturing year : 1997 Complete with drive, frame, motorized inlet-vane, frequency drive (Siemens) |
- In very good condition
- Was stopped in August 2020
- Already dismantled and stored
- Very good price
|
| New Spare Parts |
1 |
Set |
|
Many Spare Parts from various makes Complete list with unit price available on request |
|
| Parallel Shear Mechanism BDF |
6 |
Pcs |
|
Make : BDF (Italy) Parallel Shear-mechanism Including support |
- Immediately available
- Very good price
|
| Parts for IS machines |
1 |
Set |
|
G 1 pc Cylinder head for baffle mech Emhart 23-7417 H 1pc Carter-oil container Emhart 23-6518 I 1pc Baffle mech-cylinder cam Emhart 23-5045 J 1pc Carter-oil container Emhart 23-5153 K 1pc Cam Emhart 23-6517 L 2 pcs Cam Emhart 23-15472 M 1 pc Cam Emhart 23-17958 N 2 pcs Cylinder head Emhart 23-16181 |
- New or in good condition
- very attrative price !
- complete list with unit prices available on request
- individual pictures available on request
|
| Plungermechanism SG (for Emhart 4’’1/4) |
3 |
Pcs |
|
Plungermechanism SG Ref. : 62-D-10 |
|
| Pusher arm 4"1/4 DG |
1 |
Set |
|
J 12 pcs Pusher arm 4"1/4 DG Heye ? |
- in very good condition
- very attractive price
- complete list with unit prices available on request
- individual pictures are available on request
|
| Rotating Tube - Mechanism Emhart 555 |
1 |
Pcs |
|
Make : Emhart Complete Rotating tube-mechanism 555 Manufacturing year : 1997 |
- Immediately available
- Feeder-mech 555 also available
- Shear-mech 565 also available
- Very good price
|
| Servo Invert Mechanism BDF |
19 |
Pcs |
|
Servo Invert Mechanism BDF Make : BDF (Italy) |
- Immediately available
- Very good price
|
| Servo Take-out Mechanism BDF |
19 |
Pcs |
|
Make : BDF (Italy) |
- Immediately available
- Very good price
|
| Spare parts for IS machines |
1 |
Set |
|
A 1 pc Stop plate L Emhart 191-11328 B 12 pcs Stop plate R Emhart 191-11329 E 1 pc Bague (bushing ?) Emhart 23-6261 F 120 pcs Plunger positioner NNPB Heye G 1 pc Bottom plate support adapter Emhart 191-21451 H 1 pc Reductor type NRV040 Moto Vario 600-3717 I 3 pcs Bottom plate support adapter Emhart 191-7202-1 |
- new or in very good condition
- very attractive price
- complete list with unit prices available on request
- individual pictures are available on request
|
| Spout Casing BDF with Front Plate |
1 |
Pcs |
|
Spout Casing BDF with Front plate (BDF 48300 similar to Emhart 81) |
|
| Spout casing Emhart 503 |
1 |
Pcs |
|
Spout casing Emhart 503 |
|
| Stacker (lehr loader) Heye-Glas |
1 |
Pcs |
|
Lehr Loader / Stacker Type 4505 Was used on a 3m wide annealing lehr Make : HEYE-GLAS (Germany) Including control cabinet Complete, with moving rails and push-bar support Manufacturing year : 1999 With original documentation |
- In very good condition
- Immediately available
|
| Stacker Push Bars |
1 |
Set |
|
1 pc Stacker push bar : L : 2,9m - d : 18cm |
- in very good condition
- very attractive price
|
| Steel front-casing for 36" forehearth channel + spout casing |
1 |
Pcs |
|
Front casing (conditioning section ) Length 1220mm, Width : 1580mm with front plate and spout casing 503 Original Emhart |
- very good condition
- very attractive price
|
| Stirrer mechanism (Revimac& BDF) for Forehearth |
3 |
Pcs |
|
Make : Revimac & BDF Complete stirrer mechanism, including frame With manual hoist to lift the stirrers With frequency drive to adapt the stirrer speed (individually) Refractory parts are not included Manufacturing year : 2007 |
- Immediately available
- Also available : frame with hoist to lift the water-jacket (before spout)
|
| Take Out Tong Head SG (for Emhart 4’’1/4) |
1 |
Set |
|
Take Out Tong Head SG including : 8 pcs |
|
| Take-out Mechanism 5” & 5"1/2 Emhart |
8 |
Pcs |
|
Make : Emhart |
- Immediately available
- Very good price
|